TAIYE-380-DTH Separated Crawler Mounted Surface Pneumatic Drill Rig

TAIYE380-DTH integrates the advanced technology of the current split pneumatic drilling rig. The prototype has passed over 3000 hours of destructive operation experiments and 4 kinds of field tests in different geological environments. It has improved more than 10 mechanical loopholes.

Finally, the three key technical problems of the previous "high failure rate, high wind consumption, and high use cost" of the split-type pneumatic drilling rig were solved. The result is an easy-to-operate low-maintenance split-type pneumatic drill with low maintenance costs, low wind requirements, and high drilling speed.

TAIYE380-DTH is a high-performance split-type pneumatic drill rig (blasting rig) developed and manufactured by TAIYE Drilling Rig.

GET A QUOTE

1. Rotary reducer
The internal structure of the blasting rig is reasonable and easy to maintain. The rotary head is replaced with an enhanced shock absorber, which can reduce the impact reaction force of the drilling. The gear-type rotary motor has fast speed, large starting torque, rapid start and stop, and reliable. The blasting rig has overload protection and low temperature rise for long-term work.
2. Strong chassis
The high-strength running mechanism provides strength and durability for the whole blasting rig. The surfaces of the drive wheels, guide wheels, track rollers, and track pads are all specially wear-resistant. The drive is strong and the adaptability is good, enabling the equipment to be used in complex terrain Maintain a stable walking posture. Use one-time oil lubrication to avoid the tedious of frequent maintenance and maintenance during use.
3. Central control hydraulic system
The ergonomically designed integrated control console integrates hydraulic actuators, drilling systems, etc. in one place to optimize operability and operating efficiency. The blasting rig body is equipped with a foldable detachable operation pedal to meet the requirements of single-person operation.
4. Robotic arm
The new structure of the mechanical arm mechanism expands the drilling direction and working range through five coupling mechanisms and hydraulic oil cylinders. Extended carriage, manganese steel slide rail and multi-group roller design skateboard can withstand large torque, resist deformation, and extend the service life of the carriage.

Parameter of TAIYE-380-DTH Separated Crawler Mounted Surface Pneumatic Drill Rig

Drilling hole diameter	90-165 mm
Max actual air pressure	2.5Mpa
Turning torque	2000N.m
Turning speed	70Rpm
Pushing length	3980 mm
Maximum pushing force	11KN
Sliding frame swing	Left 47°/Right 54°
Drilling boom swing	Left 40°/Right 40°
Drilling boom pitching	horizontal 23°/46°
Grade ability	35°
Feeding motor power	3.8Kw
Dimension	610023602105mm
Weight	5400kg